Natural stone like paint

"Shi Caile" natural real stone paint is the company introduced new technology, using natural color marble, granite stone as raw materials, with high polymer polymer and various additives by special process manufacturing of senior water-soluble interior and exterior decorative paint. Can be widely used in cement building, wood structure, cardboard, gypsum products surface.

key word:

SECCINO

Category:

Sand Textured Coating

Hotline：

+86-0769-89237333

Contact

Message

Natural stone like paint

Picture and text details

"Shi Caile" natural lacquer is the introduction of new technology by the company, the use of natural color marble, granite stone as raw materials, with high polymer polymer and various additives by special process manufacturing of high water
Interior and exterior decorative paint. Can be widely used in cement building, wood structure, cardboard, gypsum products surface. Lacquer coating can make the building reflect the natural, stable, magnificent surface and the original appearance of natural stone.
Indoor and outdoor decoration, craft modeling, urban European sculpture and other application scenarios can be applied.

Product category:
Type A natural lacquer
B type natural lacquer
Type C natural lacquer

Product features:
l, rich color, gorgeous appearance, simulation stone effect.
2. Excellent outdoor weather resistance, crack resistance and detachment prevention.
3, strong water resistance, long service life.
4, simple construction, easy to clean, easy to renovate.

Construction tools:
Special thick paint spray gun, paint cylinder, paint spray gun, batch knife, etc.

Paint consumption:
Primer :0.1-0.15kg/㎡
Stone paint :3-5kg/㎡
Finish :0.13-0.18kg/㎡

Product implementation standards:
JG/T 24-2000 "Synthetic resin emulsion sand wall building Paint"
GB 24408-2009 "Limits of harmful Substances in Exterior Wall Coatings for Building"

Construction process:
Base surface treatment: The new wall surface should ensure that the surface is smooth, clean and strong, and the gap should be repaired and leveled. Old wall to remove loose coating, remove surface dust, oil, repair and smooth. Make sure the wall is fully dry,
Water content < 10%, PH < 10, by rolling or spraying the primer evenly applied to the wall.
The primer can be sprayed with natural stone after 2-6 hours of drying, requiring two molding, thickness of 2-3mm, spraying pressure > 8kg. After drying, use sandpaper to smooth and blow away the floating ash. After the stone paint is completely dry, spray the finish coat 1-2 times.

Construction conditions:
l, 5-35℃. Above 40℃ or below 5℃ is not suitable for construction, rain, snow, fog and wind level 4 above the weather can not be construction.
2, storage temperature: 5-35℃ (avoid exposure to the sun and 0℃ below the environment).

Warm tips:
1. Clean the construction tools with water in time after use. Unused paint should be sealed and stored in a cool place.
2, due to the different state of the base surface and spraying effect, there will be differences in unit consumption.