Natural stone flake paint

"Shi Caile" natural rock slice paint, is carefully developed, break through the tradition, show the characteristics of natural granite new generation wall decoration paint. It is made of natural colored sand, polymer resin and laminated rock sheet.
With good adhesion and weather resistance, and simple construction technology can achieve a single gun colorful wonderful effect, completely comparable to the texture of natural granite, so that the appearance of the building is more real. Due to can reduce natural flowers
The environmental damage caused by massive mining of granite is a great achievement of scientific and technological environmental protection.

Scope of application:
Building inside and outside walls, cylindrical surface, concrete surface, PC board, ALC board, calcium silicate board,
Gypsum board, composite board, wood board, cement fiber board, metal plate, etc.

Product features:
1, light, safe, small building load, do not fall off.
2, a variety of colors, and not restricted by modeling.
3, waterproof, UV resistance, acid and alkali resistance.
4, excellent stain resistance, self-cleaning function, strong color retention, durable adhesion ability
5, low cost, convenient renovation, keep fashion trend forever.

Construction tools:
Paint cylinder, paint spray gun, special thick paint spray pathetique.

Paint consumption:
Primer: 0.12-0.15kg/㎡
Rock chip paint: 3-5kg/㎡
Finish coat: 0.15-0.2kg/㎡

Product implementation standards:
HG/T 4344-2012 "Water-based composite rock slice imitation granite Paint"
GB 24408-2009 "Limits of harmful Substances in Exterior Wall Coatings for Building"

Construction procedure:
Base surface treatment: before construction, remove dirt, dust and other attachments on the base surface
After the base surface is dry, the construction is carried out, and then the flat and concave surface of the base is repaired with leveling putty.
Honeycomb, hole, sanding cleaning, etc. Water content < 10%. PH < 10.
Sealing primer: Apply the sealing primer to the wall with an airbrush or roller.
Slit treatment: according to the design pattern segmentation, with the ink line calibration according to the size of the slit to tape paste treatment.
Middle layer: spray rock flake paint with special spray gun.
Groove seam treatment: After the rock sheet paint is sprayed, gently flatten it with a bare roller or a flexible batch knife, then tear up the seam cleaning tape, dry and polish it.
Surface: Spray the finish coat evenly with the finish coat spray gun.
Clean up: Clean up the contaminated part.

Construction conditions:
1, 5-35℃, more than 40℃ or less than 5℃ is not suitable for construction, rain, snow, fog and level 4 wind above the weather can not be constructed.
2, storage temperature: 5-35℃ (avoid exposure and 0℃ environment).

Warm tips:
1. Clean the construction tools with water in time after use. Unused paint should be sealed and stored in a cool place.
2, due to the different state of the base surface and spraying effect, there will be differences in unit consumption.